Electrician engineer will be responsible to run, maintain, repair and improve all control aspects of the highly automatic production line within FAIST ChemTec (Tianjin) Co. Ltd. Product of FAIST ChemTec are bitumen based noise dampening materials for automotive industry, e.g. Benz, BMW, Porsche and other brands. Those bitumen foils are produced by a highly automatic endless production line which includes e.g. a bitumen and other material automatic weighting and mixing section, calendaring belt, automatic attachment of foils and glue and automatic punching press station. The line is automatically controlled where at least the punching press should be fully integrated up to ERP through an MES system. The production line has numerous sensors for automatic control and to sense current status of line. Simatic S7 is used to control the production line of FAIST plant.

電氣工程師將負責法斯德科技（天津）有限公司所配備的高度自動化生產線的全部運行、日常維護、修理和改善優化控制。公司所生產產品是基于瀝青的噪音阻尼材料，用于汽車業，被奔馳、寶馬、保時捷等汽車品牌所采用。瀝青阻尼板由高度自動化、連續生產產線生產。產線包括瀝青和其它物料自動稱量和混合設備、壓延設備、自動覆膜設備、涂膠和自動沖壓設備。生產線實現自動化控制，其中至少?zèng)_壓設備必須通過MES系統完全集成到ERP系統中。生產線包含諸多用于自動化控制的傳感器，用于檢測產線當前狀態。產線控制使用Simatic S7系統。

Responsibilities of Electrician Engineer:
電氣工程師崗位職責：
1. Support FAIST experts and setup and installation of automatic line control in FAIST Tianjin plant
負責協助法斯德總部專家，搭建并安裝法斯德天津工廠自動化產線控制設備

2. Daily maintenance and repair of Simatic S7 based production line including electronics, sensors and software code related to automatic line control
負責產線Simatic S7系統的日常維護、維修，負責其與自動化產線控制相關的電氣、傳感器和軟件編程部分的工作

3. Continuous improvement of Simatic S7 code to increase quality and throughput of FAIST Tianjin plant
負責不斷完善Simatic S7編程，以提升法斯德天津工廠產品質量和產能

4. Error or malfunction analysis to find root cause of production stops or problems in either Simatic S7 code or hardware (sensors, electrical wiring, switching boxes and control equipment)
負責錯誤或故障分析，找到產線停止運轉的真因或Simatic S7系統的軟件或硬件（感應器、電線、開關箱和控制設備）故障。

5. Communication with line control experts in Germany, to share experiences improvements of Tianjin plant
負責與德國產線控制專家交流，分享改善天津工廠自動化生產線控制經驗。

Job Requirement:
任職要求：
1. College degree or above, major in mechanical, automation or other related majors
大?；蛞陨蠈W(xué)歷，主修機械，或自動化等相關專業

2. More than 3 years’ working experience with equipment maintenance; Experience in automated production line maintenance is preferred
3年以上設備維修經驗,有自動化生產線維修經驗者優先考慮

3. Mater the use of Siemens S7-1500/1200 Control System
精通西門子S7-1500/1200控制系統

4. Proficient in low-voltage electrical power distribution, inverter, servo control motor, servo controller and related knowledge; extremely strong at handling automatic fault; high voltage network operation experience is preferred
熟練掌握低壓電器配電、變頻器、伺服控制電機，伺服控制器及相關知識，極強的自動化故障處理能力； 有高壓入網操作經驗優先考慮

5. Familiar with mechanical principle, able to use Auto CAD, pro or solid work and other drawing software, and able to map non-standard parts
熟悉機械原理，能夠運用Auto CAD, Pro/E 或Solid work等繪圖軟件 ，并能夠?qū)Ψ菢?biāo)零件測繪

6. Familiar with the principle of hydraulic system and able to analyze the malfunction of hydraulic system and propose the solution
熟悉液壓系統原理，能夠?qū)σ簤合到y(tǒng)故障進行分析并提出解決方案

7. Familiar with MS Office
熟練使用office(Excel, Word, PowerPoint)等辦公軟件

8. Good at English reading and writing and able to use English as working language
具備良好的英語讀、寫能力，能夠用英語進行工作交流

9. Hard working, diligent, clear-minded, innovative and good at execution and having sense of ownership
能吃苦耐勞，工作勤奮，思維清晰，創新意識強，高度的執行力和高度的主人翁精神；

10. Good at analyzing and solving problems
具有較強的分析問題和解決問題的能力

11. Self-driven personality
能自我推動解決問題

法斯德科技（天津）有限公司，位于天津市西青經濟開發區。公司成立于2015年底，是德國法斯德科技集團全資子公司。其母公司法斯德科技集團成立于1895年，位于德國沃爾姆斯市，在全球擁有五大工廠，主要從事寶馬、梅賽德斯、大眾等品牌汽車車身降噪類阻尼產品的研發、生產和銷售。法斯德科技集團在全球擁有700多名雇員，為客戶提供一流產品和現場服務。從最初的產品創意，到原型產品測試，再到產品最終交付，直至產品下架，法斯德?lián)碛幸恢Ы?jīng)驗豐富的工程師和技術員團隊，為客戶提供上述一系列服務。法斯德深知其業務根基源于其高素質員工團隊，源于他們在公司充滿熱情和創新精神的工作。是員工成就了法斯德在關鍵市場領域占有率第一的成績。我們歡迎您的加入，運用創新去生產生態、環保的材料產品。