職責描述：工作職責Electronic Engineer works in sourced product team on the electronic control module development. Involve in the new product de, to verify PCBA vendor’s design and process to guaranty the product’s quality and project can deliver on time. 履行外購新產品開發過程中電子控制模塊的電子電路評審，以保證產品的性能及可靠性，及項目及時交付。 1. Involve in multiple projects at same time, to qualify the control module. 多項目管理，同時參加多個項目的電子控制板的審核工作。 2. Make the control module specification according to the project/product requirement. 依據產品及項目要求，制定電子控制模塊規格書。 3. ****uate the module cost from engineer’s view. 從工程角度評估控制模塊的價格。 4. Qualify the module design from vendors, and do testing from each sample lot. 審核控制模塊設計廠商的電路設計，以及對各個階段的工程樣機進行驗證分析。 5. Review the module manufacturing process control, also the fixtures on the assemble line. 審查生產制造工藝及產線工裝治具。 6. Do testing according the standard, and make analysis report of the test. 執行測試標準/條款，分析測試結果。 7. Review and control the documents during the module development, such as DFMEA, PFMEA, Stack-up Analysis, BOM, etc. 新產品開發過程中的文檔審核及管控，如DFMEA，PFMEA，誤差累計分析，物料清單等。 8. Following SBD’s new product development process. 能夠適應遵循公司的項目管理流程。 9. Communicate with Project Manager, and feedback the progress of the control module. 能夠與項目經理良好協作、及時反饋電子模塊項目進展。 10. As project engineer for control module, lead the communication on the electric parts. 積極參與、協調與供應商在項目上的溝通。 11. Can do business trip as required, both domestic and overseas. 根據工作及項目需要適時出差，國內及國際。 12. Attend the global meeting, which may happen at not work time. 參加項目組全球會議，可能會發生在非工作時間。 13. Involve in some control module design works. 參與部分控制模塊的設計工作。任職要求：1.Bachelor degree and 3+ years’ experience on electronic control module design or product implementation for electronic assemblies. 本科及以上學歷。應用電子、電子信息工程、電氣自動化等相關專業。三年及以上工作經驗。 2.Familiar with the principle of circuit. Good circuit troubleshooting skill on manufacturing process problems and electronic assembly failures. 有一定的電子產品研發背景。熟悉電路基本原理，了解電子產品的生產工藝。 3. Familiar with PCBA manufacturing process. 會使用基本的電子行業工具，如示波器、電子負載機等。 4. Design software skill, such as Altium design. 會用一般應用軟件，例如Altium Design。 5. Can read and write technical reports in English. 能用英語分析和制作工作所需文件。 6. Good communication skill and project leadership is a plus. 一定的溝通及管理協調能力。

百得（蘇州）科技有限公司是美國百得集團在華獨資公司。公司位于蘇州工業園區，于1998年2月正式開業。經過七年的努力，百得蘇州已成為百得集團在亞太區最具規模的制造與研發中心,年產值逾2億美元,并憑卓越的業績獲得美國總部的長期投資的承諾。公司已在蘇州工業園區出口加工區興建了逾三萬平方米的廠房，將原生產規模擴大了四倍，并在蘇州工業園區興建了一所國際一流的研發中心及遠東測試中心。